Bahasa: EN | BM |

Berkongsi:


LIMESPLUS- Hardness Controller



The Limes hardness monitoring devices enable cost-effective monitoring of reverse osmosis systems with reliable chemical analysis

  • Reliable and accurate monitoring of water hardness using a laboratory-calibrated indicator.
  • Monitoring of a defined limit value determined by the LHV indicator used.
  • No delayed response behavior compared to a swelling resin sensor.
  • No calibration and no drift effects compared to an electrode measurement.
  • No wear or regeneration of the sensor necessary.
  • Separate connection cables for power supply, relay and input contact.
  • Status display with four LEDs for limit value compliance, analysis status, device status and pending service.

Product information LIMESPLUS

  • LED status display
  • language-neutral
  • First value suppression to prevent false alarms
  • Flushing duration adjustable to the supply line length
  • Automatic interval operation: limit value control of the system at adjustable intervals of 10, 20 or 30 minutes
  • Connections:
    • 2 potential-free outputs:
      • Limit value exceeded
      • Device fault
    • Input contact for potential-free switch
      • External analysis start
      • Pausing the internal interval using a flow switch
  • Diagnostic program for testing the assemblies


Frequently Asked Questions for LIMESPLUS- Hardness Controller

Apa itu pengawal keras LIMESPLUS dan mengapa pemantauan keras LIMESPLUS sesuai untuk sistem RO?
LIMESPLUS ialah peranti pemantauan keras untuk pemantauan RO kos efektif dengan penunjuk kalibrasi makmal dan empat isyarat LED status. Sokong semak selang automatik dan dua keluaran gangguan. SEO: LIMESPLUS pengawal keras.
LIMESPLUS menggunakan penunjuk kalibrasi makmal, elak drift dan keausan, flush boleh laras, selang 10/20/30 min. Tiada kalibrasi sensor diperlukan. SEO: pemantauan keras
Dua keluaran tanpa voltan, input, permulaan analisis luar, dan paparan status empat LED untuk had/analisis/peranti/servis. SEO: kawalan sistem RO
Ya, tempoh flushing boleh laras mengikut panjang talian bekalan, dan operasi interval automatik dengan pilihan 10/20/30 min menyesuaikan dengan susun atur RO.
Maklumat produk menonjolkan paparan status LED, operasi neutral bahasa, penindasan nilai pertama, dan program diagnostik. Rujuk lembar spesifikasi rasmi. SEO: maklumat produk

 Pertanyaan - LIMESPLUS- Hardness Controller