Water quality sensor
Carian Imej Berkuasa AITag terpilih
Pemilihan Tag
- Water quality sensor (28)
- Hydro-Air (118)
- Online water quality monitoring Malaysia (21)
- drinking water (11)
- Systea (11)
- aquaculture (9)
- RS-485 (8)
- ISE (7)
- Optical DO (6)
- RO & DI water (6)
- safe water (6)
- TSS & NTU (6)
- Biological Process (5)
- Drinking water and wastewater monitoring (5)
- Free chlorine (5)
- pH sensor (5)
- City Water (4)
- Conductivity (4)
- Electric Conductivity (4)
- raw water treatment (4)
- Turbidity (4)
- waste water treatment (4)
- Water disinfection monitoring system (3)
- biological pond (2)
- COD (2)
- Continuous water quality monitoring system (2)
- Dissolve Oxygen (2)
- DO sensor (2)
- food processing industrial (2)
- Vodapro (2)
- waste water (2)
- 0 to 1000 NTU (1)
- Calcium Sensor (1)
- Chlorine Dioxide Sensor Malaysia (1)
- circulation water (1)
- Digital EC (1)
- environment (1)
- Environment water control (1)
- Feed water monitoring (1)
- Food & Beverage (1)
- inductive sensor (1)
- industrial water (1)
- low dissolved oxygen (1)
- Medium range Turbidity (1)
- Oil Sensor (1)
- on-line monitoring (1)
- pH/ORP (1)
- Process Water (1)
- Resistivity (1)
- river water (1)
- salinity (1)
- Secondary Pressurized distribution Chlorine dioxide Monitoring (1)
CD1N
Chlorine Dioxide Sensor
CD1N Chlorine dioxide sensor with membrane-covered amperometric two-electrode system, designed for accurate and stable measurement in water treatment applications.
Lihat lebih lanjut...
P-J003-EW1-S09FF
Specification
Measuring Method : Nephelometric 90oC scattered light
light source: LED
Measuring range: 0 to 50,000 mg/L
Accuracy: 3% of reading or 300 mg/L.
Lihat lebih lanjut...
P-J002-EW1-S09FF
Specification
Measuring Method : Nephelometric 90oC scattered light
light source: LED
Measuring range: 0 to 1000 NTU
Accuracy: 2% of reading or 0.05 NTU. whichever is greater
Display resolution: 0.00-19.99 NTU:20.0 NTU-999.9 NTU: 0.1NTU.
Lihat lebih lanjut...
Micromac 2000
Water Quality Monitoring System
Product catalogue
COD ANALYSER
Provides reliable and accu rate analysis of organic pollutants for water quality monitoring at low cost and low maintenance.
Hydro-Air CS3000 controllers offer un rivaled user friendliness & minimalistic design offers the most convenient operation than any analyzers.
Lihat lebih lanjut...
Oil in Water Sensor
Digital RS-485 Output
The Oil in Water OIW sensor operates based on the ultraviolet fluorescence technique, offering high sensitivity and precision. Compared with other measurement methods,
the fluorescence method is faster, more efficient, and highly repeatable.
Lihat lebih lanjut...
Low Turbidity Measurement 0-100 NTU
Digital Turbidimeter with integral bubble trap and 5m cable length, IP68.
Code: MNTU-200-100-S05F
High accuracy :
-Build-in bubble removal
design to prevent
condensation to
maintain stable reading
for low turbidity.
Digital EC Sensor
Conductivity/Salinity/TDS Measurement
Hydro-Air Digital 4-Electrode Conductivity sensor measures the conductivity, salinity and TDS of aqueous solutions in industrial and municipal process applications.
The sensor offers a high degree of accuracy for a longer period and wide range of conductivity measurement.
Lihat lebih lanjut...
Turbidity & TSS Sensor
Digital RS-485 output
Hydro-Air Digital Turbidity and Suspended Solids Sensor is the long-awaited solution to your turbidity and suspended solids measurement.
The measuring principle of the sensors is based on 90º Nephelometry light scatter.
Lihat lebih lanjut...
Nitrile Sensor
Ion Selective
Hydro-Air Nitrite combination ISE is a potentiometric sensor working with Ion Selective Electrode (ISE) and a reference electrode supplying the milivolts signal (mV).
Using single crystal fim technology, the electrode potential is measured across a solid and polished crystalline membrane.
Lihat lebih lanjut...
Water Hardness ISE Sensor
Ion Selective Sensor
Hydro-Air Hardness combination ISE is a potentiometric sensor working with Ion Selective Electrode (ISE) and a reference electrode supplying the milivolts signal (mV).
Using single crystal fim technology, the electrode potential is measured across a solid and polished crystalline membrane.
Lihat lebih lanjut...
CALCIUM SENSOR
Ion Selevtive
Hydro-Air Calcium combination ISE is a potentiometric sensor working with Ion Selective Electrode (ISE) and a reference electrode supplying the milivolts signal (mV).
Using single crystal fim technology, the electrode potential is measured across a solid and polished crystalline membrane.
Lihat lebih lanjut...
Ion Selection Electrode Analyzer
High accuracy and reliable ion selective electrode (ISE) analyzer providing better compliance and process control.
Hydro-Air ION3000 & ION300 colour graphical controllers offer unrivaled user friendliness in measurement of Ion Concentration with Ion Selective Electrodes (ISE).
Lihat lebih lanjut...
Free & Total Chlorine Analyzer
High accuracy and reliable Free/Total Chlorine analyzer providing better compliance and process control.
Hydro-Air FCLG3000 colour graphical controller offers unrivalled user friendliness in measurement of Free and Total Chlorine. Its minimalistic design
offers the most convenient operation than any analyzers.
Lihat lebih lanjut...
TURBIDITY & TSS SENSOR
Digital RS-485 Output
Hydro-Air Digital Turbidity and Suspended Solids Sensor is the long-awaited solution to your turbidity and suspended solids measurement.
The measuring principle of the sensors is based on 90 degree Nephelometry light scatter.
Lihat lebih lanjut...
Digital DO SENSOR
Polarograhic Type
Hydro-Air Digital Dissolved Oxygen Sensor is membrane based and uses polarographic technology to determine dissolved oxygen levels. The sensor is comprised of double-electrode cell, with a cathode and an anode, joined by the electrolyte and separated from the sample by a permeable membrane.
Lihat lebih lanjut...
OPTICAL DO SENSOR
Dissolved Oxygen Measurement
Hydro-Air Optical Dissolved Oxygen Sensor is designed to provide fast, accurate and drift-less measurement.
Its measuring method is based on optical luminescent technology approved by ASTM International Method D888-05.
Lihat lebih lanjut...
OPTICAL DO SENSOR
DISSOLVED OXYGEN MEASUREMENT
Hydro-Air Optical Dissolved Oxygen Sensor is designed to provide fast, accurate and drift-less measurement.
Its measuring method is based on optical luminescent technology approved by ASTM International Method D888-05.
Lihat lebih lanjut...
DO SENSOR
Low ppb Measurement
Hydro-Air DO sensor is membrane based and uses polarographic technology to determine dissolved oxygen levels. The sensor generates a potential, mV, related to the dissolved oxygen in contact with membrane. It also has a built-in thermistor for automatic temperature compensation.
Lihat lebih lanjut...
DO SENSOR
Membrane Type
Hydro-Air DO sensor is membrane based and uses polarographic technology to determine dissolved oxygen levels. The sensor is comprised of double-electrode cell, with a cathode and an anode, joined by the electrolyte and separated from the sample by a permeable membrane.
Lihat lebih lanjut...
Digital pH Sensor
pH Measurement
Hydro-Air Digital pH sensors are commonly used in the wastewater and potable water applications.
The sensors are built with gel-filled electrolyte which greatly reduce the possibilities of reference poisoning.
Both sensors can be installed either in submersion or inline to the process.
Lihat lebih lanjut...
Kami menyediakan pelbagai peralatan kualiti air dan instrumen proses seperti meter pH, meter konduktiviti, meter aliran, meter kekeruhan, sensor tahap, dan transmitter tekanan. Semua peralatan ini direka untuk membantu pemantauan, pengukuran dan kawalan yang lebih tepat dalam aplikasi industri serta rawatan air.
Selain itu, kami juga membekalkan pam dos kimia, peralatan ujian air, dan sistem kawalan proses bagi memastikan operasi yang lebih efisien dan stabil. Sila hubungi kami jika anda ingin mengetahui lebih lanjut tentang Hydro-Air pH-ORP E-Series Sensor.
VodaSense P-SERIES
Simply the best pH/ORP Sensors.
Hydro-Air P-Series combination pH/ORP sensors are commonly used in the wastewater and potable water applications.
The P-Series sensors are built with gel-filled electrolyte which greatly reduce the possibilities of reference poisoning.
Lihat lebih lanjut...
Hydro-Air Digital 4-Electrode Conductivity sensor measures the conductivity of aqueous solutions in industrial and municipal
process applications.
The sensor offers a high degree of accuracy for a longer period and wide range of conductivity measurement. The electrode is
made of titanium for greater chemical resistance.
Lihat lebih lanjut...