Water quality sensor
AI-Powered Image SearchSelected tag
Tag Selection
- Water quality sensor (27)
- Electric Conductivity (4)
- Hydro-Air (118)
- Vodapro (1)
- Environment water control (1)
- Conductivity (4)
- RO & DI water (6)
- Resistivity (1)
- salinity (1)
- inductive sensor (1)
- Online water quality monitoring Malaysia (19)
- RS-485 (8)
- waste water treatment (4)
- raw water treatment (4)
- pH sensor (5)
- pH/ORP (1)
- aquaculture (9)
- Dissolve Oxygen (2)
- biological pond (2)
- low dissolved oxygen (1)
- Food & Beverage (1)
- food processing industrial (2)
- Optical DO (6)
- Biological Process (5)
- DO sensor (2)
- City Water (4)
- TSS & NTU (6)
- Water disinfection monitoring system (2)
- drinking water (11)
- Free chlorine (5)
- ISE (7)
- Calcium Sensor (1)
- safe water (6)
- Feed water monitoring (1)
- industrial water (1)
- Drinking water and wastewater monitoring (5)
- Digital EC (1)
- Process Water (1)
- Turbidity (4)
- Oil Sensor (1)
- circulation water (1)
- river water (1)
- COD (2)
- on-line monitoring (1)
- environment (1)
- Continuous water quality monitoring system (2)
- Systea (11)
- Medium range Turbidity (1)
- 0 to 1000 NTU (1)
- waste water (2)
P-J003-EW1-S09FF
Specification
Measuring Method : Nephelometric 90oC scattered light
light source: LED
Measuring range: 0 to 50,000 mg/L
Accuracy: 3% of reading or 300 mg/L.
More Details...
P-J002-EW1-S09FF
Specification
Measuring Method : Nephelometric 90oC scattered light
light source: LED
Measuring range: 0 to 1000 NTU
Accuracy: 2% of reading or 0.05 NTU. whichever is greater
Display resolution: 0.00-19.99 NTU:20.0 NTU-999.9 NTU: 0.1NTU.
More Details...
Micromac 2000
Water Quality Monitoring System
Product catalogue
COD ANALYSER
Provides reliable and accu rate analysis of organic pollutants for water quality monitoring at low cost and low maintenance.
Hydro-Air CS3000 controllers offer un rivaled user friendliness & minimalistic design offers the most convenient operation than any analyzers.
More Details...
Oil in Water Sensor
Digital RS-485 Output
The Oil in Water OIW sensor operates based on the ultraviolet fluorescence technique, offering high sensitivity and precision. Compared with other measurement methods,
the fluorescence method is faster, more efficient, and highly repeatable.
More Details...
Low Turbidity Measurement 0-100 NTU
Digital Turbidimeter with integral bubble trap and 5m cable length, IP68.
Code: MNTU-200-100-S05F
High accuracy :
-Build-in bubble removal
design to prevent
condensation to
maintain stable reading
for low turbidity.
Digital EC Sensor
Conductivity/Salinity/TDS Measurement
Hydro-Air Digital 4-Electrode Conductivity sensor measures the conductivity, salinity and TDS of aqueous solutions in industrial and municipal process applications.
The sensor offers a high degree of accuracy for a longer period and wide range of conductivity measurement.
More Details...
Turbidity & TSS Sensor
Digital RS-485 output
Hydro-Air Digital Turbidity and Suspended Solids Sensor is the long-awaited solution to your turbidity and suspended solids measurement.
The measuring principle of the sensors is based on 90º Nephelometry light scatter.
More Details...
Nitrile Sensor
Ion Selective
Hydro-Air Nitrite combination ISE is a potentiometric sensor working with Ion Selective Electrode (ISE) and a reference electrode supplying the milivolts signal (mV).
Using single crystal fim technology, the electrode potential is measured across a solid and polished crystalline membrane.
More Details...
Water Hardness ISE Sensor
Ion Selective Sensor
Hydro-Air Hardness combination ISE is a potentiometric sensor working with Ion Selective Electrode (ISE) and a reference electrode supplying the milivolts signal (mV).
Using single crystal fim technology, the electrode potential is measured across a solid and polished crystalline membrane.
More Details...
CALCIUM SENSOR
Ion Selevtive
Hydro-Air Calcium combination ISE is a potentiometric sensor working with Ion Selective Electrode (ISE) and a reference electrode supplying the milivolts signal (mV).
Using single crystal fim technology, the electrode potential is measured across a solid and polished crystalline membrane.
More Details...
Ion Selection Electrode Analyzer
High accuracy and reliable ion selective electrode (ISE) analyzer providing better compliance and process control.
Hydro-Air ION3000 & ION300 colour graphical controllers offer unrivaled user friendliness in measurement of Ion Concentration with Ion Selective Electrodes (ISE).
More Details...
Free & Total Chlorine Analyzer
High accuracy and reliable Free/Total Chlorine analyzer providing better compliance and process control.
Hydro-Air FCLG3000 colour graphical controller offers unrivalled user friendliness in measurement of Free and Total Chlorine. Its minimalistic design
offers the most convenient operation than any analyzers.
More Details...
TURBIDITY & TSS SENSOR
Digital RS-485 Output
Hydro-Air Digital Turbidity and Suspended Solids Sensor is the long-awaited solution to your turbidity and suspended solids measurement.
The measuring principle of the sensors is based on 90 degree Nephelometry light scatter.
More Details...
Digital DO SENSOR
Polarograhic Type
Hydro-Air Digital Dissolved Oxygen Sensor is membrane based and uses polarographic technology to determine dissolved oxygen levels. The sensor is comprised of double-electrode cell, with a cathode and an anode, joined by the electrolyte and separated from the sample by a permeable membrane.
More Details...
OPTICAL DO SENSOR
Dissolved Oxygen Measurement
Hydro-Air Optical Dissolved Oxygen Sensor is designed to provide fast, accurate and drift-less measurement.
Its measuring method is based on optical luminescent technology approved by ASTM International Method D888-05.
More Details...
OPTICAL DO SENSOR
DISSOLVED OXYGEN MEASUREMENT
Hydro-Air Optical Dissolved Oxygen Sensor is designed to provide fast, accurate and drift-less measurement.
Its measuring method is based on optical luminescent technology approved by ASTM International Method D888-05.
More Details...
DO SENSOR
Low ppb Measurement
Hydro-Air DO sensor is membrane based and uses polarographic technology to determine dissolved oxygen levels. The sensor generates a potential, mV, related to the dissolved oxygen in contact with membrane. It also has a built-in thermistor for automatic temperature compensation.
More Details...
DO SENSOR
Membrane Type
Hydro-Air DO sensor is membrane based and uses polarographic technology to determine dissolved oxygen levels. The sensor is comprised of double-electrode cell, with a cathode and an anode, joined by the electrolyte and separated from the sample by a permeable membrane.
More Details...
Digital pH Sensor
pH Measurement
Hydro-Air Digital pH sensors are commonly used in the wastewater and potable water applications.
The sensors are built with gel-filled electrolyte which greatly reduce the possibilities of reference poisoning.
Both sensors can be installed either in submersion or inline to the process.
More Details...
We offer a complete range of water quality and process instrumentation, including pH meters, conductivity meters, flow meters, turbidity meters, level sensors, and pressure transmitters. These instruments are designed to deliver accurate measurement, monitoring, and control across various industrial and water treatment applications.
We also provide chemical dosing pumps, water testing solutions, and advanced process control equipment to support efficient system performance and reliable operation. Please contact us if you wish to know more about Hydro-Air pH-ORP E-Series Sensor.
VodaSense P-SERIES
Simply the best pH/ORP Sensors.
Hydro-Air P-Series combination pH/ORP sensors are commonly used in the wastewater and potable water applications.
The P-Series sensors are built with gel-filled electrolyte which greatly reduce the possibilities of reference poisoning.
More Details...
Hydro-Air Digital 4-Electrode Conductivity sensor measures the conductivity of aqueous solutions in industrial and municipal
process applications.
The sensor offers a high degree of accuracy for a longer period and wide range of conductivity measurement. The electrode is
made of titanium for greater chemical resistance.
More Details...
Inductive Conductivity Sensor
Digital RS-485
EC/Salinity/Concentration
Hydro-Air Inductive Conductivity, Salinity, Acid & Base Concentration Sensor is designed for high range conductivity and corrosive environment measurement, mainly in process water and wastewater treatment.
More Details...